Description
Milesight AM100 Series Sensor supports 3 types of display modes as below.
| AM104 | ||
| Mode 1 | Mode 2 | Mode 3 |
 |  |  |
| AM107 | ||
| Mode 1 | Mode 2 | Mode 3 |
 |  |  |
This article will guide you how to switch display mode on the screen.
Requirement
Milesight LoRaWAN Sensor: AM104/AM107
Configuration
Here are 3 methods to switch among the three modes:
- Power button: Quick press the power button to switch the mode.
- Mobile App: Go to Milesight ToolBox App menu Device -> Setting -> General Settingsto select screen display mode, and then click Write to set.
- Software: Go to Toolbox menu Device Settings -> Basic -> Basic Settingsto select screen display mode, and click Save.
--END--