AM100 Firmware Upgrade for Frozen Accident In Low Battery Scenario : IoT Support

AM100 Firmware Upgrade for Frozen Accident In Low Battery Scenario Print

Created by: Harry Hua

Modified on: Wed, 12 Jan, 2022 at 8:51 PM

Problem Description:

Milesight IoT has determined that a small percentage of AM100 series sensor displays may stop refreshing, the USB could not be recognized, the NFC could not be read in low battery situation. Affected devices were manufactured after June 2020.

If your AM100's firmare version is lower than v1.28, please keep scrolling and learn how to upgrade it to v1.28 with ToolBox the configuration software for Windows.

Related Properties:

Low battery level.

Solution:

1. Download and run ToolBox

Download centre: https://www.milesight-iot.com/software-download/

2. Go to "Maintenance>Upgrade"

3. Upgrade

Click "Browse" to locate .bin file, "Upgrade" and then wait for a while, the upgrade will be finished shortly.

Harry is the author of this solution article.

Did you find it helpful? Yes No