Frequently Asked Questions
Frequently Asked Questions of Milesight LoRaWAN Controller
Q1: What's the use of the DI mode of GPIO interface on UC51x? Answer: DI mode can be used to detect the real value status to know if valve control tak...
Tue, 29 Nov, 2022 at 1:35 PM
Q1: Can UC100 transmit data between two RS485 devices (like meter to PLC)? Answer: Yes, UC100 can be used as Milesight D2D Agent or Controller to transmit...
Thu, 3 Nov, 2022 at 4:53 PM
Q1: How can I check if the solar panel is charging the battery of UC501? Answer: There is no direct way to check the charging status, but it will charge t...
Fri, 7 Oct, 2022 at 5:57 PM
Q1: Questions about UC51X: 1. How to connect UC51X to solenoid valve device? 2. Is it possible to connect two solenoid valves into one connector? 3. How...
Fri, 26 Aug, 2022 at 4:31 PM
Q1: Is it feasible to connect the probe of EM500-PP to UC50X? Answer: Yes, it can connect to UC50X via RS485 or analog interfaces. Q2: For UC11xx GPIO...
Thu, 28 Jul, 2022 at 7:23 PM
Q1: Is it possible to write some custom application on UC300? Do you provide software toolchain to do that? Answer: No, UC300 is based on STM32 microcon...
Tue, 28 Jun, 2022 at 7:21 PM
Q1: Does UC50X support detect dry contact pulses? Answer: Yes, please refer to How to Wire DI/DO of Milesight UC Series Controller. Q2: Can UC11-N1 be...
Wed, 25 May, 2022 at 2:56 PM
Q1: An external sensor is powered with 5/9/12V of UC501, but why there is no power output on both interface 1 and 2? Answer: In order to save battery powe...
Fri, 22 Apr, 2022 at 10:54 AM
Q1: Can you provide power consumption figures for UC501 V1 when only RS485 device connected? Answer: The consumption of every lora uplink package is not m...
Fri, 18 Mar, 2022 at 5:46 PM
Q1: What is the power consumption of the UC1114? Answer: When UC1114 send Lora message, the highest power consumption is 0.24W. Q2: Do you have a UC ...
Tue, 1 Mar, 2022 at 8:17 PM